Raymarine Base Station Installation And Commissioning Manual - Specification
LifeTag Installation & Commissioning Guide
15
Specification
FCC and Industry Canada Information
The LifeTag and LifeTag Base Station comply with US CFR47 part 15 Rules and with IC Standard
RSS210. Operation is subject to the following two conditions: (1) these devices may not cause
harmful interference and (2) these devices must accept interference received, including interference
that may cause undesired operation.
Changes or modifications to these devices not expressly approved in writing by Raymarine could
violate compliance with FCC or IC rules, and void the user's authority to operate the equipment.
Declaration of Conformity
Raymarine UK Ltd. hereby declares that the LifeTag and LifeTag Base Station are in compliance with
the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC.
The original Declarations of Conformity may be viewed on the relevant product pages at
www.raymarine.com.
Approvals
Parameter
Base Station
Tag
Power source
8 V to 16 V dc external supply
Non-rechargeable, CR2 3V
lithium battery
Dimensions (overall)
2.6 in x 4.7 in x 1.4 in
(66 mm x 118 mm x 36mm)
1.93 in x 2.24 in x 1 in
(49 mm x 56.8 mm x 24.4
mm)
Ancillary switched output contact rating
200 mA at supply voltage
N/A
Transmitted power (nominal)
1 mW
1 mW
Temperature:
Operating:
Non-operating:
-15°C to +55°C
-20°C to +70°C
Humidity
0% to 95% non-condensing
Base Station to Tag range
Typically 30 ft (9 m)
Maximum number of Tags per system
16
Maximum number of Repeater Base Stations
per system
1
EU
R&TTE Directive 1995/5/EC
USA
FCC Part 15
FCC ID: PJ5-LTB (LifeTag Base Station)
PJ5-LTT (LifeTag)
Industry Canada
RSP100
ID IC:4069B-LTB (LifeTag Base Station)
IC:4069B-LTT (LifeTag)
87064_3.book Page 15 Friday, July 28, 2006 9:32 AM