Rivet King RK-4500 Instruction manual - page 24
24
The recommended oil for priming is Mobil DTE 24 available in 0.51 or one gallon containers, or, you
can use 30W hydraulic oil. Please see safety data below.
MSDS for Mobile DTE SERIES PNEUMATIC OIL
--------------------------------------------------------------------------
1. PRODUCT AND COMPANY IDENTIFICATION
--------------------------------------------------------------------------
PRODUCT NAME: MOBIL DTE SERIES
SUPPLIER: EXXONMOBIL OIL CORPORATION
3225 GALLOWS RD.
FAIRFAX, VA 22037
24 - Hour Health and Safety Emergency (call collect): 609-737-4411
24 - Hour Transportation Emergency:
CHEMTREC: 800-424-9300 202-483-7616
LUBES AND FUELS: 281-834-3296
Product and Technical Information:
Lubricants and Specialties: 800-662-4525 800-443-9966
Fuels Products: 800-947-9147
MSDS Fax on Demand: 713-613-3661
MSDS Internet Website: http://www.exxon.com, http://www.mobil.com
--------------------------------------------------------------------------
2. COMPOSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------------
CHEMICAL NAMES AND SYNONYMS: PET. HYDROCARBONS AND ADDITIVES
GLOBALLY REPORTABLE MSDS INGREDIENTS:
None.
See Section 8 for exposure limits (if applicable).
--------------------------------------------------------------------------
3. HAZARDS IDENTIFICATION
--------------------------------------------------------------------------
Under normal conditions of use, this product is not considered hazardous
according to regulatory guidelines (See section 15).
EMERGENCY OVERVIEW: Amber Liquid. Note: Pressurized mists may form a
flammable mixture. DOT ERG No. : NA
POTENTIAL HEALTH EFFECTS: Under normal conditions of intended use,
this product does not pose a risk to health. Excessive exposure
may result in eye, skin or respiratory irritation.
For further health effects/toxicological data, see Section 11.
--------------------------------------------------------------------------
4. FIRST AID MEASURES
--------------------------------------------------------------------------
EYE CONTACT: Flush thoroughly with water. If irritation occurs, call
a physician.
SKIN CONTACT: Wash contact areas with soap and water. Remove and
clean oil soaked clothing daily and wash affected area.
INJECTION INJURY WARNING: If product is injected into or under
the skin, or into any part of the body, regardless of the
appearance of the wound or its size, the individual should be
evaluated immediately by a physician as a surgical emergency.
Even though initial symptoms from high pressure injection may be
minimal or absent, early surgical treatment within the first few
hours may significantly reduce the ultimate extent of injury.
INHALATION: Not expected to be a problem. However, if respiratory
irritation, dizziness, nausea, or unconsciousness occurs due to
excessive vapor or mist exposure, seek immediate medical
assistance. If breathing has stopped, assist ventilation with a
mechanical device or mouth-to-mouth resuscitation.
INGESTION: Not expected to be a problem. Seek medical attention if
discomfort occurs. Do not induce vomiting.
--------------------------------------------------------------------------
5. FIRE-FIGHTING MEASURES
--------------------------------------------------------------------------
EXTINGUISHING MEDIA: Carbon dioxide, foam, dry chemical and water fog.
SPECIAL FIRE FIGHTING PROCEDURES: Water or foam may cause frothing.
Use water to keep fire exposed containers cool. Water spray may