Rivet King RK-4500 Instruction manual - page 26
26
--------------------------------------------------------------------------
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------
OCCUPATIONAL EXPOSURE LIMITS:
When mists/aerosols can occur, the following are recommended: 5 mg/m3
(as oil mist)- ACGIH Threshold Limit Value (TLV), 10 mg/m3 (as oil mist)
- ACGIH Short Term Exposure Limit (STEL), 5 mg/m3 (as oil mist) - OSHA
Permissible Exposure Limit (PEL)
VENTILATION: If mists are generated, use adequate ventilation, local
exhaust or enclosures to control below exposure limits.
RESPIRATORY PROTECTION: If mists are generated, and/or when
ventilation is not adequate, wear approved respirator.
EYE PROTECTION: If eye contact is likely, safety glasses with side
MSDS for Mobile DTE SERIES PNEUMATIC OIL (cont…)
shields or chemical type goggles should be worn.
SKIN PROTECTION: Not normally required. When splashing or liquid
contact can occur frequently, wear oil resistant gloves and/or
other protective clothing. Good personal hygiene practices
should always be followed.
--------------------------------------------------------------------------
9. PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------
Typical physical properties are given below. Consult Product Data Sheet
for specific details.
APPEARANCE: Liquid
COLOR: Amber
ODOR: Mild
ODOR THRESHOLD-ppm: NE
pH: NA
BOILING POINT C(F): > 316(600)
MELTING POINT C(F): NA
FLASH POINT C(F): > 200(392) (ASTM D-92)
FLAMMABILITY (solids): NE
AUTO FLAMMABILITY C(F): NA
EXPLOSIVE PROPERTIES: NA
OXIDIZING PROPERTIES: NA
VAPOR PRESSURE-mmHg 20 C:
VAPOR DENSITY: > 2.0
EVAPORATION RATE: NE
RELATIVE DENSITY, 15/4 C: 0.871
SOLUBILITY IN WATER: Negligible
PARTITION COEFFICIENT: > 3.5
VISCOSITY AT 40 C, cSt: 32.0
VISCOSITY AT 100 C, cSt: 5.3
POUR POINT C(F):
FREEZING POINT C(F): NE
VOLATILE ORGANIC COMPOUND: NE
DMSO EXTRACT, IP-346 (WT.%):
NA=NOT APPLICABLE NE=NOT ESTABLISHED D=DECOMPOSES
FOR FURTHER TECHNICAL INFORMATION, CONTACT YOUR MARKETING REPRESENTATIVE
--------------------------------------------------------------------------
10. STABILITY AND REACTIVITY
--------------------------------------------------------------------------
STABILITY (THERMAL, LIGHT, ETC.): Stable.
CONDITIONS TO AVOID: Extreme heat and high energy sources of ignition.
INCOMPATIBILITY (MATERIALS TO AVOID): Strong oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: Product does not decompose at
ambient temperatures.
HAZARDOUS POLYMERIZATION: Will not occur.
--------------------------------------------------------------------------
11. TOXICOLOGICAL DATA
--------------------------------------------------------------------------
---ACUTE TOXICOLOGY---
ORAL TOXICITY (RATS): Practically non-toxic (LD50: greater than 2000
mg/kg). ---Based on testing of similar products and/or the