Rixen M70-D Instruction Manual - page 2
3. Key Description
Key
Function
Description
LCD display
Power key
●
Press one time for power on or off (auto power off)
●
When power off, hold then press
to turn on and
process manual operating model.
A. (HOLD) Hold value, max./min. and
average value. €
As below:
key operating and
Function description.
HOLD
→
MAX
→
MIN
→
AVG
→
REC
B. Enter memory reading
REC
C. Manual power off function
+
:
as above
M
A. Process instrument calibration
function
+
:
When power off
, press
and hold, then press
to turn on and enter
calibration function.
※Unavailable to auto power off while
calibration function is processing.
CAL
B. Process reading storage function
Hold the present value and select memory
location, then press this key to process
storage.
HOLD
C. Process deletion all memory
function
Hold this key over 1.5 seconds to delete all
memory data.
Display memory
volume「
00
」
A. Turn on LCD back-light function
Hold this key over 1.5 seconds to turn on
back-light
B. Memory location back search
function
Press the key one time to move back a
memory location; hold this key to further
search location speedily
Display memory
location「
XX
」
A. Tree kinds or measured material
groups selection function
Press this key to select 1~9 tree kinds
groups(please refer to the calibration table)or
built material coefficient reference code
Display group code
「
X
」
B. Memory location front search
function
Press this key one time to move front a
memory location; hold this key to further
search location speedily
Display memory
location「
XX
」
Remark:
key operation and function description(circle operating) Display symbol
Press Hold reading/memory reading ...........................HOLD
Read the maximum value in memory…………………………………….…….MAX
Read the minimum value in memory…..………………………………………..MIN
Read the average value in memory……….……………………………………..AVG