Rixen M70-D Instruction Manual - page 3
Read the value of every memory location 0 ……………………….REC
including tree kinds(groups)code
Recover normal measurement function
4. Operating Instructions
A. Preparation
A-1 Please check all accessories of the instrument before using:
◇ Main instrument-----------------------------------------NO.M70-D x 1 pc
◇ Protection cap (on the instrument)-- -----------------NO.713M x 1 pc
◇ External needle type probe-----------------------------NO.7021 x 1 pc
◇ Replacement standard needle -------------------------NO.701P/S x 2 pc
◇ Replacement needle screw-----------------------------NO.702B x 2 pc
◇ Soft portable leather case-------------------------------NO.765Cx 1 pc
◇ 9V battery (option)-------------------------------------NO.B09V x 1pc
◇ Instruction manual (including wood calibration tables)-----------------------------1 ea
A-2 Set battery:
Press the round mark on the instrument battery cap and push the cap below and set the batteries
by⊕ polarity and push back the battery cap.
A-3 Take away the protection cap front the instrument to show the needle and inspect the shape of
needle and its firmness.
A-4 Power on and power model:
Auto power off model→ press to turn on the instrument, if there is no any operation within
1 minute, it will turn off automatically.
Manual power off model→ When power off, hold and press to turn on and the
instrument will process manual power off model, except for pressing and
power out off, the instrument will not turn off automatically.
※Whatever auto/manual power off model, just press for power off.
B. Measurement method
B-1 Finish the power on steps as above, please check the battery power indicator to sure the power is
enough and it is available to process moisture measurement and every function operating.
B-2 Use the front two needles to stab into the measured material to read the moisture of material on
the display.
B-3 If the condition is difficult to operate or needs long needle to measure deeply, please use the
extension probe (No.7021) to connect the right side outlet of the instrument for measuring.
※The reading value of same object measured by extension probe and needle is equal
C. Record function operating-use as the operation below:
C-1 Reading value hold function(HOLD)
When get reading value at B-2 step, press one time to hold the value on the display