Rixen M70-D Instruction Manual - page 4
C-2 Maximum reading value function(MAX)
Press the key twice in the normal model to read the maximum value and the memory location
C-3 Minimum reading value function(MIN)
Press the key thrice in the normal model to read the minimum value and the memory location
C-4 Average reading value function(AVG)
Press the key four times to read the average value and the memory records
C-5 Memory reading function(REC)
Press the key five times in the normal model to enter the memory reading function for recalling
the memory location and data records including tree kinds and groups data.
※Press again, and it will return to the normal model
C-6 Reading records function
When the measured value is hold, it is able to use to select the required record
no. location, and then press to record the measured value in the no. location you
selected
※When the selected memory location has been used, the new data will replace the original
data. This instrument has 99 records volume and 8 groups display function
C-7 Records deletion function
In the measured model, hold and await the memory volume display「00」to delete the
storage data
※The data in the memory only can be deleted by (C-7) step, and it will not disappear because
of power off or power out off
D. Tree kinds (groups) selection
In the normal model, it is able to use to select tree kinds (or groups) for getting the
more accurate moisture value. The selected tree kinds (or groups) symbol will display on the
LCD below
※◆This instrument has 8 groups of tree kinds(groups), available to press for circle selection
◆Every time turn on, tree kinds(groups) will be set at NO.1. The tree kind(group) before
turning off will not be recorded
E. LCD Back-light function
On:In the normal model, press over 1.5 seconds to turn on back-light
Off:When back-light is on, press over 1.5 seconds to turn off back-light
※ If there is no any operation with in 30 seconds, back-light will be turned off automatically
when back-light is on
※ Back-light function will deplete power speedily, if it is not necessary, please don’t use
back-light as possible
F. Calibration and adjustment function
This instrument has been adjusted completely before ex-factory. If the condition is special and