Rixen TX-600N Instruction Manual - B.Rcd Record Mode:
B.RCD Record mode:
※Please use the AC Adaptor when you need to record for a long time
Under testing mode, press
into the record mode, It will show the
sampling rate before starting record. Under the record mode press
and
can switch the display, the
will flashed when recording.
T1 and T2 will show the number of records with the present time, Press
Or
to stop record. The
will be displayed when there are log data in
the internal. The screen will shown FULL when the amount of record are full.
Press
or
to exit. Alarm function cannot be switched on the record mode.
Status
Display contents
Normal conditions
Probe condition, Probe type, warning data condition,
Power indication
T1 Real-time
Temperature display
Area A: T1 Measuring data value
Area B: Reading Record
Area C: Current time
T2 Real-time
Temperature display
Area A: T2 Measuring data value
Area B: Reading Record
Area C: Current time
T1-T2 Real-time
Temperature display
Area A: T1-T2 Temp. data
Area B: T1 Measuring data value
Area C: T2 Measuring data value
Time and Date display
Area A: Year
Area B: Month, day
Area C: Hour, minute
C. Thermocouple switch mode:
Under the testing mode, press and hold
more than two seconds.
Entering the thermocouple switch mode when
appeared, press
and
to switching the type, press
to finish the switch.
-7-