Rixen TX-600N Instruction Manual - D.Hold Mode:
D.Hold Mode:
In lock mode, display content as description below:
E. RCD Reading Mode:
Under the testing mode, press
to enter the RCD clear mode. Use
and
to
switch the displayed record value. Press the
again can back to the testing mode.
Press and hold the
and
can speed us the switch. Press and hold
than
press the
and
can switch 100 readings at once. Press
for 2 seconds to
switch to the RCD clear mode.
Display content
Description (Area A)
T1-HOLD display
Hold the T1 temperature data
T1-MAX display
T1 maximum temperature data
T1-MIN display
T1 minimum temperature data
T1-AVG display
T1 average temperature data
T2-HOLD display
Hold the T2 temperature data
T2-MAX display
T2 maximum temperature data
T2-MIN display
T2 minimum temperature data
T2-AVG display
T2 average temperature data
Under testing mode, press
to enter the
reading hold mode, Use
and
to switch
the T1 and T2 values, press
again to return to
the testing mode. If there are data log in internal,
the record will show the maximum, minimum,
average. Press and hold
two seconds to entering
the RCD clear mode.
-8-