S&P HR100V Installation And Wiring Instructions - page 9
Manual is about: HR SERIES HEAT RECOVERY VENTILATOR (HRV)
of
16
Page 9
10. OUTSIDE FRESH AIR AND EXHAUST AIR HOODS
TIP TO INSTALLER: We
recommend and it is
good
practice to have a minimum of
6ft (1.83 m) between the supply
and exhaust vents, unless using
a concentric vent design to
prevent contamination of intake
air.
NOTE: Outdoor air intake
hoods shall be located to avoid
contamination from sources such
as:
• Exhaust air openings
• Driveways (auto exhaust)
• Combustion appliances
• Gas meters, oil fill pipes
• Garbage containers
• Attics or crawl spaces
• Under deck or other areas of
questionable air quality
figure 10.1 Locating Outside Hoods
6ft (1.83 m)
18" (457 mm)
IMPORTANT: Always consult your national
and local regulations, building and safety
codes.
figure 7.4 Slide collar on the unit.