Safa Media R200 Instruction Manual - page 15
Connecting to PC
27
Disconnecting the unit from your PC
Before disconnecting, make sure no data is being
transferred.
For Windows 98/98SE
Disconnect the unit from your PC.
For Windows XP/Me/2000
Follow the steps below to disconnect. (The screen shots
are of Windows XP.)
. The screen might be different for a different OS.
1. Right-click the Task tray icon at
the bottom right of the Windows
screen.
If the icon is not displayed, refer to the Windows help.
2. Click [Safely Remove Hardware] displayed.
3. Select [USB Mass Storage Device] and click [Stop].
2) Click
1) Select
Selecting the action Windows is to take
After connection, the following screen will appear
(Windows XP only).
. For Windows Me/2000/98/98SE, this operation is not
needed.
The screen shots are of Windows XP.
Adjust your settings to match your PC's environment.
In this manual, [Take no action] is selected, [Always do
the selected action] is checked, and [OK] is clicked. This
completes the connection to the PC.
When connected to the PC, the unit display will be as
shown below and none of the operating buttons will
work.
Note
2) Check
3) Click
1) Select
During data transfer, the
recording LED blinks
Before disconnecting the unit from the PC, be sure to
follow the steps on the next page. Do not disconnect
during data
Connected to PC
28