Safa Media R200 Instruction Manual - page 6
Recording
9
VAS (Voice activated system) recording
1. In the stop mode, press and hold down the
(MENU/
STOP) button for
at least 2 seconds.
The menu setting display appears.
2. Press the or (SKIP/SEARCH) button
repeatedly to select "VAS".
3. Press the
(POWER/PLAY) button.
"OF" blinks.
4. Press the or (SKIP/SEARCH) button to
select "On".
5. Press the
(POWER/PLAY) button to set it.
6. Press the
(MENU/STOP) button.
7. Press the
(REC/PAUSE) button to start VAS
recording.
Recording begins when you are
speaking into the microphone.
When dictation stops, recording
stops. ("VAS" and the remaining
recording time blink.)
Press the or (SKIP/SEARCH) button to
set the VAS sensing level ("VAS 1" (minimum) -
"VAS 5" (maximum)) when recording begins.
Selecting recording LED on/off: (See page 21.)
SP H I
V A S
Selecting the folder
Press the FOLDER/REPEAT button repeatedly to select
the folder ( "A" , "B" , "C" or "D" ) in the stop mode.
Selecting the microphone sensitivity: (See page 20.)
Starting recording
1. Press the
(REC/PAUSE)buton. Recording starts
with new file number.
2. Press the
(MENU/STOP) button to stop recording.
File number
Each time a recording is made, a new file number appears.
The unit can record up to 99 files in one folder. "99 FULL"
blinks when attempting to record the 100th file.
Temporarily stopping recording (Recording pause)
Press the
(REC/PAUSE) button during recording.
. The remaining recording time blinks.
Press it again to resume recording.
Note
SP H I
Remaining recording time
File number
Microphone
sensitivity
SP H I
Recording mode
10