Safa Media R200 Instruction Manual - page 5
Selecting a recording mode
1. In the stop mode, press and hold down the
(MENU/
STOP) button for
at least 2 seconds.
. The menu setting display appears.
2. Press the or (SKIP/SEARCH) button
repeatedly to select "REC".
3. Press the
(POWER/PLAY) button.
. The selected recording mode blinks ("HQ", "SP"
or "LP").
4. Press the or (SKIP/SEARCH) button to
select the recording mode.
5. Press the
(POWER/PLAY) button to set the
recording mode.
6. Press the
(MENU/STOP) button.
Recording
Selecting display
7
SP H I
H I
LP
SP H I
HQ
H I
Using an earphone
Connect the earphone (supplied) to the jack. The
speaker is automatically disconnected.
Be sure to reduce the volume before connecting or
disconnecting the earphone.
CAUTION:
. High volume levels can create potentially
dangerous situations by drowning out surrounding
sounds. Use caution when driving, bicycling, or
jogging while operating the unit, and obey all
applicable laws.
. Do not play your earphone at a high volume level.
Hearing experts advise against continuous
extended play.
. If you experience a ringing in your ears, reduce the
volume or discontinue use.
Using an external microphone
Connect an external microphone (supplied) to the
jack. The built-in microphone is automatically
disconnected.
Selecting the beep sound: (See page 20)
In the stop mode, press the
(MENU/STOP) button
repeatedly. The display changes as follows:
Total playing time
Current time
Current date
Remaining recording time (
REMAIN
)
Recorded
time (
REC TM
, if there is file)
Recorded date (
REC
TM
, if there is file
Selecting display
Note
64MB
128MB
Recording time (approx.)
HQ (High-quality)
SP (Standard) LP (Long)
4h 30 minutes 22h 30 minutes 36 hour
Mode
9 hour 45 hour 72 hour
8