SafeDial GL45-3G Installation And User Manual - page 4
SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page 4
Features of the Globe SafeDial Wireless device include:-
Multipath 3G and IP – Telstra SIM enabled.
Four (4) hour integrity polling – Providing an Always On health check.
Simplicity – Simple installation with supplied antennae and software tools.
Works with any Control Room.
No additional call charges – Low purchase price with fixed monthly cost.
No GPRS receiver equipment required at the Control Room.
No extra monitoring fees as all events are reported to standard PSTN receivers, including equipment
and poll fail messages.
All alarm events and health checks exceptions are transmitted in Contact ID.
Continuous online health checks and reporting of larm panel (inclusing watch dog reset timer), and
dialler interface leads.
SafeDial 1345 enabled providing total portability should you ever change Control Rooms.
Ability to remotely interrogate (DC power, signal strength etc), testing and commissioning of all
devices via a PC, tablet or smartphone using SafeDial Toolbox.
Ability to remotely arm & disarm Alarm Panels from your smartphone via the Pocket Secure App.
Ability to remotely upload/download Alarm Panel configuration from your PC via SafeDial Config.
Up to 14.4K band Modem for upload/download.
Three (3) Outputs.
Three (3) Inputs.
Various LED status indicators for easy onsite diagnostics.
Future Proof with seamless fireware upgrades.
All communications acknowledged and sent using AES128 encryption.
Approved to: EN301489, EN301908, EN62311 and EN60950-1.
Australian designed and supported product.
The IP Module acquires an IP address automatically using customer DHCP services.
Non-volatile memory stores all setup information in the event of a power failure.
Features of SafeDial Wireless GL45-3G