Safety Vision PatrolRecorder 4C Installation Manual - page 2
PatrolRecorder
™
4C Installation Guide
October 2009
Part Number
Hardware Item
OPV-UMOUNT
Universal visor bracket for forward-facing
camera
SV-BHRNS
MDVR main wiring harness
SV-CFAC
Wireless audio system interface cable
SV-CFRC Rear
camera
SV-CFRCHRNS
Rear camera cable
SV-ILCB
Monitor/inline control box cable
SV-LCD56B-KIT 5.6-inch
color
monitor
SV-LCDRM1.04 Monitor
bracket
SV-LS-
CONSOLEMT
Flush-mount (console) bracket for MDVR
SV-PCAMCABLE
Forward-facing zoom camera
power/video cable
SV-PR2.4GREC
Wireless audio system charging
base/receiver
SV-PR2.4GTRANS Wireless audio system transmitter
SV-PRSONY-10X
Forward-facing zoom camera
PATROLRECORDER 4C IG Ver 1.5.doc
2
System Components
Components of the PatrolRecorder™ 4C system are as
follows:
MDVR
Ï MDVR (Part Number SV-4CHDDVR)
A DIRECTIONAL
BUTTONS—have the following
functions, depending on the current mode:
When video is being played back at normal speed
(1X):
y
UP—cycles up from Channel 1 through Channel
4 and the quad view for audio/video output
y
DOWN— cycles down from Channel 4 through
Channel 1 and the quad view for audio/video
output
y
LEFT—adjusts fast-reverse video playback
speed to a maximum of 90X
y
RIGHT—adjusts fast-forward video playback
speed to a maximum of 90X
When playback video is paused:
y
LEFT—reverses video playback one frame at a
time
y
RIGHT—advances video playback one frame at
a time
When video is not being played back, these buttons
move the cursor through on-screen menu
selections, and the
RIGHT button functions as an
ENTER key by confirming menu selections.
When the DVR is in Record or Standby mode, the
UP and DOWN directional buttons are used to
cycle input between Channel 1 through Channel 4
and the quad view
B ACCESS DOOR LOCK—allows key access to the
hard drive slot