Safety Vision PatrolRecorder 4C Installation Manual - page 6
PatrolRecorder
™
4C Installation Guide
October 2009
Install the monitor as follows:
PATROLRECORDER 4C IG Ver 1.5.doc
6
~
Affix the monitor bracket (Part Number SV-
LCDRM1.04) to the mounting surface, and affix the two
guide tabs to the swiveling head of the monitor bracket,
as follows:
Ï Installing the Monitor Bracket and Two Guide Tabs
~
Slide the monitor onto the two guide tabs on the
swiveling head of the monitor bracket, adjust the angle as
necessary, and tighten the handle screw, as follows:
Ï Installing and Adjusting the Monitor
Forward-Facing Zoom Camera Installation
The forward-facing zoom camera is designed to be
installed with the universal visor bracket (Part Number
OPV-UMOUNT) (which is mounted between the vehicle
headliner and the passenger-side visor clip) and a swivel
mount (Part Number CAMMOUNTPAN).
Install the forward-facing zoom camera as follows:
~
Remove the screw from the vehicle’s existing
passenger-side visor clip, and then remove the visor clip,
as follows:
Ï Removing the Visor Clip for Camera Installation
~
Put the universal visor bracket (Part Number
OPV-UMOUNT) in place, and then reaffix the original
visor clip with the original screw, as follows:
Ï Installing the Universal Visor Bracket