Safety Vision PatrolRecorder 4C Installation Manual - page 4
PatrolRecorder
™
4C Installation Guide
October 2009
Forward-Facing Zoom Camera
Part Number SV-PRSONY-10X
PATROLRECORDER 4C IG Ver 1.5.doc
4
A GREEN LED—
indicates that the system power is ON
and that the camera is in Standby mode
B RED LED—
indicates that the MDVR is recording
C POWER/VIDEO CONNECTOR—
accepts the circular
connector of the SV-PCAMCABLE
Rear Camera
Part Number SV-CFRC
The rear camera features an integrated microphone and
infrared illuminators for better image quality in low light.
Wireless Audio System
Charging Base/Receiver Part Number SV PR2.4GREC
Transmitter Part Number SV PR2.4GTRANS
NOTE:
At the end of its useful life, dispose of the battery
pack supplied for the wireless audio system only
at an appropriate collection site.
A ANTENNA CONNECTOR
B RJ45 JACK—accepts the RJ45 connector of the
wireless audio system interface cable (Part Number
SV-CFAC)
C BATTERY STATUS LED:
Steady red indicates that the battery is charging
Steady green indicates that the battery is fully
charged
D TRANSMITTER STATUS LED:
Steady green indicates that the transmitter is in
Record mode
Green off indicates that the transmitter is not in
Record mode
Flashing green indicates that ID Matching is ON
E MUTE ON/OFF BUTTON—mutes audio output or
resumes normal audio output
F ALERT MODE SELECTOR BUTTON—when the
wireless audio system is in Standby mode, switches
between alert modes as follows, and in the following
order:
Beep
only
Vibrate
only
Beep and vibrate
No
action
G TALK BUTTON—starts a recording
H GREEN STATUS LED:
Steady green indicates that the transmitter is ON
and in Standby mode
Flashing green indicates that audio output is
muted
I RED BATTERY STATUS LED:
Steady red indicates a low battery
Flashing red indicates that the transmitter is out of
range of the base
J MICROPHONE JACK—for optional lapel microphone