SAGEMCOM Seen User Manual - Seen – Seen A
Seen – Seen A
13
Directory capacity
Your directory has a capacity of 100 contacts.
When the memory is full, the message "pb full" is displayed and you cannot add any new
contacts.
Assigning a shortcut
By default, the voicemail number is assigned to the key.
1.
Go to the menu "
regl. Comb
" " direct MEM. " " key 1 " or " key 2 " or " key 3 ".
2.
You can now use the
key to delete the registered number (if required).
Press
.
3.
Enter the new number and press
key.
U
SING THE MULTI
-
HANDSET CAPABILITIES
These functions are used for handset management when two or more handsets are registered on
the same base.
Intercom Call
1.
Make sure your handset is on standby mode.
2.
Press the
key.
If your installation has two handsets:
the second handset is directly called, and "calling hs X" appears on the screen (x is the number of
the handset called).
If your telephone installation has more than two handsets:
1. Select the desired handset using or (or select “ALL” if you want to call all handsets).
2.
Press
.
The handset rings.
3.
Accept the call from the called handset.
4.
When you have finished your call, press
key.
Answering an internal call
1.
" call fr hs " followed by the calling handset number is displayed on the screen.
2.
Press
to accept the call.
Managing an external and an internal call
Transfering an external call to another handset registered on same base
1.
During a call, press
.
2.
Select "intercom ", press
. The incoming call is put on hold.
3.
Enter the internal call number. When the user answers, you can announce the call.
4.
Press
key to transfer the call.
If the called handset does not answer, press
to take back the call.
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. To set up a
telephone conference from an external call:
1.
During a call, press
.
2.
Select "intercom", press
. The external user is put on hold.
3.
Enter the internal call number. Wait until the internal user answers.
4.
Press and hold until you hear a confirmation tone to start a three-way conference.
"conference" is displayed on the handset screen.