Saipa 111 Body Repair Manual - page 42
Manual is about: 69hp at 5500rpm
of
53
42
SAIPA 141 / Maintaining and repairing manual Body and trimming
If there is any problem in separating the
glue, use a warmer to warm the strip.
Make sure that there is no dirt on the strips
before assembling. Then, stick bilateral
glue on the strip.
Assembling and disassembling side
weather strip
Use a knife or a cutter to cut the adhesion
between the strip and the body. Be cau-
tious not to hurt the body painting.
After that, clean the last glue on the body.
Caution:
Clean the last glue with the minimum dam-
age produced in cleaning procedure on the
strip and the body.
Assembling and disassembling of parts