- DL manuals
- Saivod
- Air Conditioner
- Sap 685
- Instruction Manual
Saivod Sap 685 Instruction Manual
Summary of Sap 685
Page 1
Portable air conditioner instruction manual tc-n028m tc-t028m tc-n028mh tc-t028mh tc-n028r tc-t028r tc-n028rh tc-t028rh ☆ read and retain these instructions for future reference.
Page 2: Specification
Specification model no. Tc-n028m tc-n028r tc-n028mh tc-n028rh tc-t028m tc-t028r tc-t028mh tc-t028rh cooling capacity 8500 btu 2491 w 8500 btu 2491 w 10000 btu 2930 w 10000 btu 2930 w heating capacity n/a 8500 btu 2491 w n/a 10000 btu 2930 w power/ampere consumption for cooling* 1010w/ 4.5a 1010w/ 4....
Page 3: Before Use
Before use general safety only use in the upright position on a flat level surface and at least 50cm from any objects (fig 1 & 4). Do not place objects on the unit or restrict air inlet / outlet (fig. 2). Closely supervise any children and pets when unit is in use. Electrical safety for indoor use o...
Page 4: Parts
Parts front back 1. Control panel 2. Air outlet 3. Carrying handle 4. Caster 5. Air filter 6. Air inlet 7. Exhaust air outlet 8. Cord storage 9. Water stopper / drainage point accessories 10. Inward adaptor - for insertion over hose and into back of the air conditioner. 11. Outward adaptor - for ins...
Page 5: Installation
Installation installation of the exhaust pipe the unit is a portable air conditioner that may be moved from room to room. 1. Using the foam strips fig.5 offer foam strips to the window gap and cut to size if necessary. Feed exhaust hose through the foam strip and insert strip into window gaps as sho...
Page 6
Mounting of the exhaust pipe use only the hose provided and clip exhaust hose and unit adaptor to the back of the air conditioner avoid kinks and bends in the exhaust hose as this will cause expelled moist air to build up causing the unit to overheat and shut down. Fig 8 & 9 show correct position th...
Page 7
Installation of the carbon filter 1. Remove the filter frame from the unit. 2. Separate the filter fixer from the filter frame. 3. Remove the active carbon filter from its plastic bag. 4. Insert the active carbon filter into the filter frame. 5. Fix the filter by reassembling the fixer onto the filt...
Page 8
Operation for mechanical type cooling only model fig. 12 1. Power indicator 2. Fan operating indicator 3. Cooling operating indicator 4. 'full water' indicator 5. Thermostat 6. Speed switch with options for - low fan, high fan, low cool, high cool 7. Timer (1-8 hours) as well as on/off switch coolin...
Page 9
Setting function / ventilation speed cooling only models : turn the speed switch to select required setting: low fan, high fan, low cool, high cool high cool low cool fig.14 speed low fan high fan cooling & heating models : turn the speed switch to select required setting: fan, low cool, high cool, ...
Page 10
Operation for electronic type control panel 18 17 16 15 11 10 9 8 7 5 4 2 14 13 12 6 3 1 timer mode down speed up i/o fig.17 1. I/o(power)button 2. Compressor operation indicator 3. Speed(ventilation)button 4. Low ventilation indicator 5. High ventilation indicator 6. Mode(function)option button 7. ...
Page 11
Setting ventilation speed 1. Press speed button to choose the ventilation speed you need, high or low. The indicator of high or low ventilation will light on at the same time. 2. If the unit is in auto mode, it will choose the ventilation speed automatically according to the ambient temperature (the...
Page 12: Drainage
. Drainage during the process of cooling, some water will be extracted from the air into the unit. If the reservoir is full: a. For mechanical type, the compressor will stop, only the fan to circulate the air. The 'full water' indicator will light now to remind you. B. For electronic type, both of t...
Page 13
Please note 1. The drain must be at or below the outlet level. 2. Flashing comp / ‘full water’ indicator will not function in this mode of drainage. 3. If you want to extend the water tube, you can connect it with another tube (od: 18mm) extended drain tube (od:18mm) original drain tube fig.23 speci...
Page 14: Maintenance
. Maintenance always unplug the air conditioner from the mains before cleaning. To maximize the efficiency of the air conditioner clean regularly. Cleaning the housing use a soft, damp cloth to wipe the body clean. Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or o...
Page 15: Fault Check List
. Fault check list the air conditioner does not run is the air conditioner plugged in? Is there a power failure? Is the comp / ‘full water’ indicator flashing? Is the room temperature below the set temperature? The machine seems to do little is there direct sunshine ? (please put down the curtain.) ...