Saivod Sap 685 Instruction Manual - page 11
Setting ventilation speed
1. Press SPEED button to choose the ventilation speed you need, high or low. The
indicator of high or low ventilation will light on at the same time.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically
according to the ambient temperature (the related indicators will light on), at this time,
the speed switch is invalid.
Setting timer
1. Press TIMER button to set the operating hours you desired (1 to 12 hours, the timer
indicator will light on). When the set time has been reached, the machine will turn off
automatically. The display window will show the hour(s) you set as you press TIMER
button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRE-SET
the time for the machine to work. For example, if you press the timer to '2', the unit
will work automatically after 2 hours.
All the above functions can also be performed
with the supplied remote control.
This remote control requires 2 pcs AAA batteries
to operate
FIG. 18
Regulating air flow direction
Turn the roller on the air vent in horizontal
way to control the air flow direction.
FIG.19
NOTICE !
5.
To prolong the compressor's life, after switch-off of the unit, please wait for 3
minutes (at least) before re-switch.
6.
The cooling system will switch off if the ambient temperature is lower than the set
one. The ventilation, however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
7.
On the contrary, the heating will switch off if the ambient temperature is HIGHER
than the set one (still, the ventilation keeps working on the set level). As the
ambient temperature drops below the selected level, the heating will return to work.
8.
This machine is equipped with ANTI-FROST function. While using the heating
function during low temperature, sometimes the heating will stop for a while in order
to melt the frost. As this occurs, just wait for the heating returns to work.
10