SAL VB X100 Instruction Manual - page 10
10
car radio and multimedia player
VB X100
MaIN FEatURES
Multifunctional 3,0” TFT LCD display • 6-language menu (GB/HU/SK/RO/SRB/SL) • radio/music/photo/video playback • Bluetooth music play • Making phone conversation hands-free
• USB/microSD/TF device is connectable • Safe, hidden microSD card slot • AM/FM radio with RDS functions • Display of radio stations’ name • alternate frequency monitoring • traffic
information data reception • Searching for specific broadcast • 12-band spectrum analyzer • 3.5 mm AUX audio input for portable devices • 4 x 50W Hi-Fi speaker output • 2 x RCA amplifier/
subwoofer output • Automatic display of a rear view camera (optional) image • 2 x video input & video output • 2 x rear monitor options for passengers
INStallatION
cONtROl BUttONS, cONNEctORS
Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language. After unpacking, please, check the
device for possible transport damages. Keep the packaging away from children, if it contains bags or other potentially dangerous components.
RESEttINg tHE UNIt
The microprocessor data requires resetting in situations where the power supply is lost or the unit (including its display) acts erratically. In order to do so, press the button for 3 seconds, located in the middle, under
the open able cover using a thin, sharp object. The equipment will switch off and will return to factory default condition. This operation is required after installation, before switching on the unit for the first time, and
when the vehicle’s battery is replaced.
SWItcHINg ON / OFF
Press the PWR button to switch the unit on. The unit will switch to RADIO mode after being switched on for the first time.
• Later on, it will automatically switch to the most recently used function after being switched on unless the external storage device has been removed in the meantime.
• Since voltage surges can occur when the vehicle’s engine is started, only turn on the unit after the engine has been started. Turn off the unit before stopping the engine. To turn off the unit, press the PWR button.
aDjUStINg vOlUME
Use the rotating knob to set the desired volume level.
• As the rotating knob (SELECTOR) is multifunctional, if the unit is in any particular setting mode, you will need to exit the mode first.
• Volume level is visible in the upper right corner. VOL: 00 - 40.
BaSIc SEttINgS & SElEctINg tHE DESIRED laNgUagE
Press MENU button, and use the rotating knob to select setting (SEtUP) function, and then press the rotating knob in. The Setup menu appears. Following parameters can be adjusted: menu language, date, current
time, factory settings, 12/24-hour time format and place of usage.
The desired function can be selected using the rotating knob, which can then be modified by pressing the rotating knob. After selecting the appropriate data by rotation, parameter can be fixed by pressing in the
knob again.
• For stepping data, you can use 9 : buttons as well, instead of the rotating knob.
language: selecting the top row, press in the rotating knob, then rotate it till the desired language can be seen, then press in again for fixing (GB / HU / SK / RO / SRB / SLO).
Date: in the second row, select the first, “month” data, then press the rotating knob and rotate it to set the value. With repeated press and rotation the “day” and the “year” can be adjusted.
current time: in the third row, the clock can be set, with same procedure like the date.
Factory default: By selecting this row and pressing the rotating knob will reset the unit to the factory defaults.
clock mode: you can select the operation mode of the clock: 12-hour (AM/PM – before noon/afternoon) or 24-hour display.
Radio frequency reception area: check that the Europe setting is the active one.
SElEctION OF Data SOURcE
You can select the signal source you want to listen to or watch in two ways:
a., Repeatedly and briefly press the MODE button, till the desired signal source is found (radio, USB/microSD music player, Bluetooth music playback from mobile phone, external audio-video data source/rear view
camera).
B., It is selectable from the menu as well with the help of the MENU button and the rotating knob. With this method, the setting menu (SEtUP) is also available.
• Desired signal source can not be activated, it is not available. For example data source is not connected, where the adequate files are available (songs, photos, films). Or mobile phone has not paired, and then the Bluetooth
function doesn’t work.
• Being switched on again, playing of last listened track will continue, if the connected device has not been removed in the meantime.
• If there is external unit connected to USB and microSD slot at the same time, then the selected one can be activated with the MENU button and the rotating knob. Basically the use of microSD slot is recommended, because
of the secure and protected location of it.
• After connecting external data sources, tracks from the last inserted one will played.
• Information about the currently active device is visible in the upper left corner of the display.
aUDIO SEttINgS & EQ
Repeatedly and briefly press the SElEctOR rotating knob and select the parameter to be set: BaS / tRE / Bal / FaD / EQ / lOUD / St / BEEP / lOc. Setting can be made by rotation and fixing with pressing the
button in.
• If there is no setting made within 3 seconds, the device will automatically switch back to the previous function.
• Normally the rotating knob will adjust the volume.
• When listening at high volume, do not set the bass and treble too high, as this may lead to distortion!
• EQ function will clear the pre-set bass and treble settings.
figure 2.
figure 1.
1.
PWR
ON/OFF switch
2.
MODE
Changing operation mode
3.
MENU
Operation modes and settings
4.
BaND
Radio bands
5.
aMS
Broadcast presentation / frequency
search
6.
:
stepping forward
7.
DISPlaY
3” coloured TFT LCD display
8.
IR
remote controller’s signal receiver
9.
USB
USB socket
10.
1/PaU
1 / play and pause
11.
2/RPt
2 / switch on repeating
12.
3/RDM
3 / random playing
13.
4/l-R
4 / selection of video narration voice
14.
5/tFt
5 / activating external screen
15.
6/av
6 / playing video files
16.
SElEctOR
setting / confirmation
17.
MUtE
speakers off or on
18.
9
stepping back
19.
MIc
built-in microphone for phone calls
20.
aUX
3,5mm stereo audio input
21.
microSD
microSD card slot
22.
RESEt
restore factory settings
1.
aNt IN
DIN antenna socket
2.
vIDEO OUt
video output for external monitor
3.
caMERa IN
video input for rear view camera
4.
lINE OUt R
amplifier or active subwoofer output
5.
lINE OUt l
amplifier or active subwoofer output
6.
M4
M4 thread screw for mounting the unit
7.
ISO IN / OUt
ISO socket: accepting ISO connector pair
(power and speaker connections)
8.
FUSE
15 A fuse
9.
vIDEO INPUt
video input, pl. TV tuner, DVD