SAL VB X100 Instruction Manual - page 13
13
• In order to replace the battery, turn the remote control facing the buttons down then pull out the battery tray with the battery. Make sure the positive terminal of the inserted battery faces upward. Follow the directions on
the bottom of the remote control!
• WARNING! IMPROPER BATTERY REPLACEMENT CAN CAUSE RISK OF EXPLOSION! BATTERY MAY REPLACED WITH SAME OR REPLACING TYPE ONE! DO NOT EXPOSE THE BATTERY TO DIRECT HEAT AND SUNSHINE AND DO
NOT THROW IT TO FIRE! IF THERE IS SOME LIQUID FLOWN OUT FROM THE BATTERY, TAKE A PROTECTIVE GLOVE AND CLEAN THE BATTERY HOLDER WITH A DRY CLOTH! KEEP THE BATTERY OUT OF REACH OF CHILDREN!
IT IS FORBIDDEN TO OPEN, BURN, SHORT CIRCUIT AND CHARGE THE BATTERY! RISK OF EXPLOSION!
• THIS PRODUCT CONTAINS BUTTON CELL. BATTERY MUST NOT BEEN SWALOWED, RISK OF CHEMICAL BURN! IN CASE OF SWALOWING, IT WILL CAUSE STRONG INTERNAL BURN AND CAN LEAD TO DEATH! KEEP THE NEW
AND USED BATTERIES OUT OF REACH OF CHILDREN! IF THE COVER OF THE BATTERY HOLDER CAN NOT CLOSE SAFLY, DO NOT USE THE PRODUCT AND KEEP OUT OF REACH OF CHILDREN. IF YOU THINK THE BATTERY HAS
BEEN SWALOWED OR GOT INTO ANY OF BODY PART, CONSULT A DOCTOR IMMEDIATELY!
FIlE FORMatS SUPPORtED BY tHE DEvIcE
• Supported video subtitle files: TXT, SRT, SSA, SUB
• Not supported videos: WMV1, WMV2, WMV3, VC1, VP6, MS MPEG-4 1 / 2…
• In case of not supported or wrong files „wrong file” message will appear.
• Playing of supported files is not granted in all cases, sine hardware and software conditions of the manufacturer can influence it.
• In ideal cases displaying of such photos and video materials is recommended which have such resolution that meets the resolution of the screen, although it is not a requirement generally. Occasionally conversion may
need.
• It is not recommended to play or store such files on the data storage which has unreasonably high resolution.
• Due the different parameters of audio and video files, the might have different volume.
WaRNINgS
• Before starting to use the player, read these instructions carefully, then keep them in an accessible place for future reference.
• Seek professional assistance if necessary to prevent damaging the unit or motor vehicle!
• Depending on the compressed files, the MP3 compression program used, and the quality of the USB/SD memory, anomalies may occur during playback, which are not due to the unit malfunctioning.
• The playback of copy righted DRM files is not guaranteed!
• It is also possible to connect MP3/MP4 players using a USB cable but avoid connecting external hard drives this way!
• Do not store any additional files on the USB/SD device other than playable files, because they can slow down or interfere playback.
• Do not connect phones, navigation devices or other equipment to the USB port for purposes of recharging!
• Do not store data storage in the vehicle if it is exposed to freezing or extremely high temperatures!
• While underway, do not do anything that distracts your attention from driving. Manipulating the player while driving can result in accidents.
• Spend as little time as possible watching the display. Doing so can distract your attention from the road, and result in accidents.
• Do not listen to the player too loud. Set a volume that allows you hear external sounds while driving. Extreme volumes can also cause permanent damage to your ears!
• Do not disassemble or remake the player, as that can cause fire, accidents, or electric shock. Incorrect use or installation renders the warranty void.
• Only for use in cars with a 12 V battery and a negative ground. Using the player for any other purpose can result in electric shock, damage, or fire. The player was designed exclusively for use in vehicles!
• Always use melting fuses with the proper values. When replacing a fuse, make sure that the new fuse has the same nominal value as the one you are replacing. Using a different fuse can cause fire or damage.
• Do not block the player’s cooling vents, as that can cause its circuits to overheat, resulting in fire. Install the player properly to ensure adequate ventilation. The air vents around the edge must be left free.
• Make sure to connect the player correctly. Incorrect connections can result fire or other defaults.
• Prior to wiring/installation, be sure to remove the car battery’s negative terminal connection! This will prevent any electric shock, short circuit or malfunction.
• While installing the player never cut through cables or damage their insulation. Doing so can result in short circuit and fire!
• Before drilling holes or inserting screws into your vehicle’s body make sure you do not damage tubes or electric wires on the other side of the cover…
• Do not connect to any electric systems of your vehicle that operate steering, brakes, or any other safety function. Doing so can result in loss of control over the vehicle, and can cause fire.
• Do not install the player or its accessories in a location where they can prevent you from controlling the vehicle safely, e.g., between the steering wheel and the gear shift.
• Make sure that wires do not coil around neighbouring objects. Arrange cables and wires in a way that does not hinder you in driving. Wires that interfere with your movement or hang over the gear shift, the brake
etc. can be extremely dangerous. (E.g., the connection cable of a media player connected to the USB port.)
• In case of any malfunction, turn of the player immediately, and consult your distributor. Many malfunctions are very easy to detect (e.g., no sound, bad smell, smoke, an external object inside the product etc.).
• Make sure that no external objects get into the USB socket or the memory card slot, as these can cause fatal damage.
• Protect it from dust, damp, liquids, heat, moisture, frost and impact, as well as direct heat or sunlight!
• When leading the connection cables make sure that their insulation does not get damaged by any sharp metal objects nearby!
• Do not connect any cables when the device is working. Never turn on the system with the volume at the maximum level. The pop or other noise spike which can be heard when switching on can cause irreparable
damage to the speakers immediately.
• The warranty is not applicable to damage caused by irresponsible or improper installation or use!
• A Somogyi Elektronic Kft. certifies that VB X 100 radio equipment conforms to directive No. 2014/53/EU. Full text of EU Declaration of Conformity is available on the following link: www.somogyi.hu
• Due to continuous improvements, the technical data and design may change without any prior notice.
• We don’t take the responsibility for printing errors which may occur, and apologize for them.
PREcaUtIONS
clEaNINg
Use a soft, dry cloth and a brush for regular cleaning. To remove stronger stains, wet the cloth slightly with water. Avoid scratching the display’s surface; never wipe the display when it is dry, and do not use a coarse
cloth to clean the display. Do not use detergents. Make sure no liquid gets inside the product or onto the connectors!
tEMPERatURE
Before turning on the player make sure that the temperature inside the car is between -10 °C és +50 °C, as the product is only guaranteed to operate properly within this temperature range. Extreme weather
conditions can damage the product.
lOcatION aND INStallatION
When installing the product, make sure it will not be exposed to any of the followings: -direct sunlight or heat (e.g. from the heating system), - wetness, high humidity, - a significant amount of dust, - strong vibra-
tion.
Warning! Manufacturer doesn’t take responsibility for lost or damaged data, even if these data, etc. have been lost during the use of this product. It is recommended to make a safety copy about the data, tracks –located
on the data storage- to your computer.
PvR
switch off
4;
play / pause
MODE
radio/USD/microSD/Bluetooth/AV IN
EQ
tone: OFF/CLASS/ROCK/POP
–
decreasing volume
+
increasing volume
switching speakers on and off
9
stepping back
:
stepping forward
1…6
number keys
aPS
broadcast introduction / frequency search
BaND
band selection: FM-1 / FM-2 / FM-3 / AM-1 / AM-2
back to the previous function