Salicru SPS.ONE User Manual - page 27
14
VIEWPOWER FUNCTION MENU
4.3.2 Scheduled On/Off
Scheduled UPS on/off can be executed once, daily, weekly.
In the window “Scheduled On/Off Setting”, users can choose
time parameters. It is recommended to set only one action in
the same time. If multiple actions have been specified at the
same time, some of these actions may be ignored. Any ac-
tions which are not supported by the UPS will be ignored.
Step 1
•
Select “Control” >> Scheduled On/Off. Refer to
Diagram 28.
Fig. 28.
Step 2
•
Set frequency and setting time on the right
column.
NOTE: Rules for setting time.
Daily schedule – Power-off time should be earlier than
power-on time. It only applies to set power-on time and
power-off time within the same day.
Weekly schedule – Power-off time should be earlier
than power-on time. It only applies to set power-on time
and power-off time within the same week.
Step 3
•
Click “Add” to add task. If task is successfully
set, it will display on the task table on the left-hand side.
Select specific task and click “Delete” button to delete
the task.
4.3.3 Scheduled Battery Self-Test
Scheduled battery self-test can be executed once, daily,
weekly, or monthly. In the window of “Scheduled Battery Self-
Test Setting”, users can choose time parameters. It is recom-
mended to set only one action in the same time. If multiple
actions have been specified at the same time, some of these
actions may be ignored. Any actions which are not supported
by the UPS will be ignored.
Step 1
•
Select Control >> Battery Self-Test. Refer to
Diagram 29.
Fig. 29.
Step 2
•
Select method and time parameters.
There are three self-test methods:
10-second self-test: Battery will discharge for 10 sec-
onds.
Self-test: Users can set battery discharge time for
self-test.
Deep test: This test will let battery discharge until it’s
in low battery level.
Step 3
•
Click “Add” to add task. If task is successfully
set, it will display on the task table on the left-hand side.
Select specific task and click “Delete” button to delete
the task.
USER MANUAL