Salora CDC1300FD Manual - page 38

37

5. Put the device On/Off

(1). Auto On/Off: once the car engine is started, the device will automatically boot. Once you put the 

device on, the camera will automatically start recording. If the car engine stops, the device will save 

the record and the power will be turned off, within 15 seconds.

(2). Manual on/off: if you want to put the device on manually, you press the   key, press again and the 

device will be turned off.

Initial settings

Set the date and time:

1. Press the OK key to put the device into the standby state.

2. Press the M key twice, and choose < time/date>, by pressing the   and   keys, then press OK to 

enter the setting

_________________________________________________________________________

3. By pressing the   and   keys, you can adjust the values, after each field you press the OK key to 

confirm, until you have completed your setting. Press M to exit the menu.

Recording Operations

1.  When the car engine is started, the device will automatically be turned and start recording. When 

the engine is stalled, the camera will stop recording. You can also pres the OK key to stop recording 

manually.

Note: In some vehicles the, although the engine is stalled, the power supply will continue. If so, 

you can stop the camera manually or you can pull out the plug of the cigarette lighter.

2. Other types of camera: press the OK key, the recording will start, press the OK key again to stop 

recording.