Salora CDC1300FD Manual - page 40

39

Special Features

1. Gravity sensor

 If you start your Gravity sensor and it detects a collision, the device will make a record which will be 

saved and locked automatically, the segment cannot be overwritten, and this file cannot be deleted.

The options for the G sensor are: High/Medium/Low/Off. Factory default: Medium

2. Parking Mode

Turn on the Parking mode, the vehicle will now be stalled, the tachograph will now automatically turn of 

the camera, as soon as the tachograph detects a vibration force generated, the tachograph will activate 

the camera automatically for 10-15 seconds and then shut down again. When the vibration is detected 

again, the camera will turn on again.

Recording video Parking mode 1080P 15 frames/sec, the file will automatically be locked.

Note: the Parking mode only works in case of automatic shutdown, if you do this manually, the 

Parking mode does not work.

3. Motion detection

After pressing the OK key shortly, the camera will start the motion detection mode, the camera will 

automatically record 10 seconds, after detecting a motion. If the camera detects no motions, it will 

automatically turn off. When the camera detects a motion, it will turn on and the red recording light will 

start to blink. Default: detection off

4. USB mode

Connect the USB cable to the computer, the tachograph will automatically pop up the menu, with the 

following options:

(1). Memory

You can now access your video and photo files

(2). Camera