Salton EX1222 Instruction booklet - Care And Maintenance
CARE AND MAINTENANCE
1. Unplug the appliance from the electrical outlet and allow to cool completely
before cleaning.
2. Wash the Filter Holder, Permanent Filter, Filter Coffee Carafe and Lid,
Espresso Carafe and Lid, Espresso Filter, Espresso Filter Holder, and Drip Tray
Cover in warm, soapy water.
Never wash any components in a dishwasher.
3. If the Steam Tube becomes blocked
remove the Rubber Frothing Nozzle.
Using the tool on the end of the coffee
measuring spoon (Steam Nozzle
Removal Tool) remove the Steam Nozzle.
Wash both the Rubber Frothing
Nozzle and Steam Nozzle in hot soapy
water. Replace the Steam Nozzle
and Rubber Frothing Nozzle after
cleaning.
NOTE: Never you a toothpick or anything that could break off and block
the Steam Tube hole.
IMPORTANT: make sure all pressure has been released and the
machine has completely cooled before removing and cleaning the
Steam Tube.
4. Wipe the outside with a damp cloth.
IMPORTANT: Never immerse the appliance in water or in any other
liquid. Do not use abrasive cleaners.
5. All servicing, other than cleaning, should be performed by an authorized
service representative. See Warranty section.
8
Rubber
Frothing Nozzle
Steam Nozzle
Steam Tube
Steam Nozzle
Removal Tool
Booklet_EX1222_ENG_Salton Booklet 3/28/12 1:44 PM Page 8