Salus OPTIMA ZigBee Quick Start Manual - Install Batteries
5
Install Batteries
Insert the alkaline batteries into the back of the
thermostat. Make sure the polarity of the
batteries is correct. After inserting the batteries,
the display will flash all the segments, followed by
the version number of the firmware, then display
US / CA with a blinking US.
Initial Configuration
When configuring the thermostat, press the + or – button or use the slider
ring to cause the desired value to blink, then press MODE to select the value.
Using the table at right,
select the country, then
the type of system.
After this configuration,
the thermostat will
display
the
Home
Screen, and be ready
for attachment to the
Mounting Plate.
Value
Description
US
United States – Configures thermostat for
use in the US.
CA
Canada – Configures thermostat for use
in Canada
HP
Heat Pump
NON-HP
Non Heat Pump – Gas, electric, or oil heat
O
Heat Pump with O reverse valve
B
Heat Pump with B reverse valve
FAN HE
Non-HP: Electric or Oil Heat
FAN HG Non-HP: Gas Heat