Samlexpower PST-15S-12E Owner's manual - Mounting Orientation
28 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 29
Fig. 8.2: PST-30S-12E, PST-30S-24E Dimensions and Mounting Slots / Dimensions (mm): 215 x 146.3 x 65.5
Mounting orientation
Theunithasairintakeandexhaustopeningsforthecoolingfan(s).Ithastobemounted
in such a manner so that small objects should not be able to fall easily into the unit from
theseopeningsandcauseelectrical/mechanicaldamage.Also,themountingorienta-
tion should be such that if the internal components overheat and melt / dislodge due to
acatastrophicfailure,themelted/hotdislodgedportionsshouldnotbeabletofallout
of the unit on to a combustible material and cause a fire hazard. The size of openings
has been limited as per the safety requirements to prevent the above possibilities when
the unit is mounted in the recommended orientations. In order to meet the regulatory
safetyrequirements,themountinghastosatisfythefollowingrequirements:
- Mount on a non-combustible material.
- The mounting surface should be able to support the weight of the unit
- Mount horizontally on a horizontal surface - above a horizontal surface
(e.g.tabletoporashelf).
- Mount horizontally on a vertical surface – The unit can be mounted on a vertical
surface(likeawall)withthefanaxishorizontal(fanopeningfacingleftorright).
seCtIOn 8 |
Installation
3
146.3
3
1.5
8
22
127
4
PST-30S Dimensions (mm): 215 x 146.3 x 65.5
215
Height: 65.5 mm
140.3