Samsung AC***MNADKH Installation Manual - page 20
20
English
Ins
tallation
Option setting
Status
17
Setting SEG21, SEG22 option
Press Low Fan button
to enter SEG21 value.
Press High Fan button
to enter SEG22 value.
Each time you press the button,
will be selected in
rotation.
SEG21
SEG22
18
Setting Heat mode
Press Mode button to be changed to HEAT mode in the OFF
status.
19
Setting SEG23, SEG24 option
Press Low Fan button
to enter SEG23 value.
Press High Fan button
to enter SEG24 value.
Each time you press the button,
will be selected in
rotation.
SEG23
SEG24
3
Check whether the option values that you have set are correct by pressing the
button repeatedly.
[SEG2, SEG3]
[SEG21, SEG22]
[SEG4, SEG5]
[SEG23, SEG24]
SEG24
SEG24
[SEG6, SEG8]
[SEG9, SEG10]
SEG10
SEG10
[SEG11, SEG12]
[SEG14, SEG15]
[SEG16, SEG17]
SEG17
SEG17
[SEG18, SEG20]
SEG20
SEG20
4
Save the option values into the indoor unit:
Press the
button with the direction of remote control for set. For correcting option values, input the option values
twice.
5
Check whether the air conditioner operates in accordance with the option values you have set:
a
Reset the indoor unit by pressing the Reset button on the indoor or outdoor unit.
b
Remove the batteries from the remote control, insert them again, and then press the
button on the remote
control.
Setting an indoor unit address and installation option