Samsung AC***MNADKH Installation Manual - page 6
6
English
Ins
tallation
AC
MNTDEH
Installation plate (1)
100
Remote control (1)
Remote control battery (2)
User Manual (1)
Installation Manual (1)
Remote Control Holder (1)
M4 x 16
Tapped Screws (2)
Tools
General tools
•
Vacuum pump
(Backward flowing
prevention)
•
Manifold gauge
•
Stud finder
•
Torque wrench
•
Pipe cutter
•
Reamer
•
Pipe bender
•
Spirit level
•
Screwdriver
•
Spanner
•
Drill
•
L-wrench
•
Measuring tape
Tools for test operation
•
Thermometer
•
Resistance meter
•
Electroscope
Step 1.3 Drilling a hole through the
wall
Before fixing the installation plate to a wall and then fixing
the indoor unit to the installation plate, a window frame,
or a gypsum board, you must determine the position of a
hole (with 65 mm inner diameter) through which the pipe
bundle (consisting of power and communication cables,
refrigerant pipes, and drain hose) will pass and then drill
that hole.
1
Determine the position of a 65 mm hole in
consideration of the possible directions of the pipe
bundle and the minimum distances between the hole
and the installation plate.
CAUTION
•
If changing the pipe direction from left to right, do not
drastically bent it but slowly turn it in the opposite
direction as shown. Otherwise, the pipe may be
damaged in the process.
Left
Right
Rear right or left
Bottom right
Preparation
(Unit : mm)
Model
A
B
C
D
AC026MNADKH
AC035MNADKH
36
60
65
36
AC052MNADKH
36
190
81
36
AC071MNADKH
33
110
110
33
Pipe bundle hole: Ø 65 mm
installation plate> B A D C B A D C B A D C Pipe bundle hole