Sensear SM1P Manual - Two-Way Radio Bluetooth
DOC00078 SM1P Manual rev 01.3
14
En
glis
h
2.
press the power button to start up in normal mode to start
using headset.
Note, the frequency/bank last selected in the setup mode will
be the frequency/bank used when Short Range is turned on.
COMMUNICATING OVER BLUETOOTH
®
:
First time pairing: Press and hold the multi-function button (MFB)
to
put the headset into pairing mode. “Bluetooth
®
discoverable”
when pairing mode is entered. Will hear a connection tone if
connection successful. Pairing mode times out after 2 minutes.
Reconnect: When powered on the headset will try to reconnect to
the last paired device. Alternatively, if the headset is not currently
paired to another device, prompt the reconnection from a device
(e.g. mobile phone that has the headset stored in its device list).
Incoming call
Answer call:
a.
From handset
b.
Press and release MFB
Reject call:
a.
From handset
b.
Press and hold Multi-function button
During call
End call:
a.
From handset
b.
Press and hold Multi-function button
c.
Call hung up on the far end
Two-way radio Bluetooth
®
:
To transmit, use the radio’s PTT. For
some select device, MFBwill perform as a Bluetooth
®
PTT (if short
range off).
Contact Sensear representative for compatible devices.