Sensear SM1P Manual - Charging
DOC00078 SM1P Manual rev 01.3
16
En
glis
h
SRCK61xx Various models, two-way radio interface cables for
most popular two way radios.
SMHK0000 Ear muff hygiene kits
SMBE0000 Behind-the-neck replacement band
SMBB0000 Headband replacement band
SMHA0001 SM1 Helmet Adaptor
– MSA Vguard
SMHA0002 SM1 Helmet Adaptor
– Protector Allsafe
SMHA0003 SM1 Helmet Adaptor
– Protector Tuffmaster
SMHA0004 SM1 Helmet Adaptor
– Unisafe Unilite
SMBM0001 Replacement boom microphone
SMAP0001 Cooling Pads
Further information may be obtained from your Sensear
representative, via the Sensear web site, or by emailing or writing to
the address on this User Manual.
CHARGING
The Sensear SM1P headset is supplied with an AC adapter that
operates globally when fitted with the appropriate electrical regional
adapter.
To charge the headset, follow the steps below:
1.
Plug the Sensear AC adapter into an appropriate power
outlet.
2.
Insert the cable end of the Sensear AC adapter into the
DC power socket on the SM1P headset.
3.
The LEDs will flash as indicated below: