Sensidyne gilian gilibrator 2 Operation & Service Manual - Specifications
29
GILIAN GILIBRATOR 2 CALIBRATION SYSTEM
Sensidyne Document No. 850190M (Rev G)
•
SPECIFICATIONS
General Specifications
Base Unit Construction ............................. Painted aluminum sheet metal
Unit Orientation ........................................ Base: Horizontal, on flat surface
Controls ..................................................... “ON” Button
“OFF” Button
“DELETE/RESET” Button
Indicators ................................................... Display (LCD)
Charge Indicator (LED)
Display Data .............................................. Flow (4-digit)
Average (4-digit)
Sample# (2-digit)
Display Ranges .......................................... Flow: 0–9999
Average: 0–9999
Sample#: 0–99
Display Messages ...................................... Low Bat
Wait
Error 1
Error 2
Viewing Angle ........................................... 60
°
Performance Specifications
Operating Temperature ............................ 5
°
to 35
°
C (41
°
to 95
°
F)
Storage Temperature ................................. 0
°
to 50
°
C (32
°
to 122
°
F)
Operating Humidity .................................. 0–85 %RH, non-condensing
Storage Humidity ....................................... 0–100 %RH, non-condensing
Accuracy .................................................... Better than 1% (Wet Cell)
Better than 3% (Piston Cell)
Electrical Specifications
Power Source (DC) ................................... Internal Battery Pack
Battery Type .............................................. Rechargeable
Battery Charge Time ................................. 14 hours
Expected Battery Life ................................ over 300 charge/recharge cycles
Input Voltage ............................................. 5.5–7.5 Vdc
Input Current ............................................. 50–60 mA
Transmission Link Requirements .............. RS-232
Interface Connectors ................................. Charger Jack (2.1 mm barrel jack)
Connecting Jack – Sensor Block (DB-9) [Wet Cell]
Connecting Jack – Sensor Rail (DB-15) [Piston Cell]
Printer Jack (DB-25)
APPENDIX B