Sequiam Biovault 2.0 Manual - page 7
e. Make sure you have good, flat contact with the sensor. As soon
as the green lights turn to orange lights, begin to swipe your
finger from Position 1 to Position 2 (indicated in Figure I
below), taking 1 to 2 seconds to complete the swipe. Try to get
your entire fingerprint to cross the sensor. The orange lights
indicate a scan is in progress. The orange lights will stay on until
the swipe is complete.
f. After the first scan is complete, your fingerprint will be displayed
on the LCD as shown in Figure J.
g. The lights will turn green again, indicating the first swipe was
successful. The screen will display “2 of 3” indicating that the
scanner is ready for the second swipe, repeat Step e (Figure H),
then the screen will display “3 of 3” prompting for the final swipe,
repeat Step e (Figure H) for a third time.
BioVault 2.0 Manual |
4