Sequiam Biovault 2.0 Manual - page 8
h. The lights will turn green if your enrollment is accepted, and the
LCD will display “Captured Saved User 1”, 2, 3 and so on, as
shown in Figure K.
i. If the enrollment was unsuccessful the red lights will light up and
the user should repeat the enrollment process.
NOTE: It is recommended that the user enroll their finger 2 - 3 times, if
possible, to increase successful access to the unit.
j. The first user (User 1) will automatically have administration
privileges.
k. Press the
button twice to exit out of the administration
menu and proceed to swipe your finger to test your enrollment,
the BioVault 2.0 should open.
NOTE: Please try to open the unit by swiping your finger the same way you
originally enrolled to ensure a successful authentication.
3. To enroll additional users:
a. Select Admin on the main menu and press
this will
prompt the admin to swipe his/her finger, as shown in Figure L.
b. Once verified, select Enroll and press
, then have the new
user follow the enrollment instructions c - k from Step 2 (page 3).
5
| BioVault 2.0 Manual