ServerLink Extend Cat5 Installation Instructions Manual - Remote Station Unit
8
------------------------
LED Indicators
The LEDs on the ServerLink Extend Cat5 KVM Extender show the
latest status which indicates the linking, communication, and control
situation between Local Computer Unit and Remote Station Unit.
Remote Station Unit
LED Status
Control Description
Remote: Off, Local: On
Remote Station Unit controls
its local PC.
Remote: On, Local: Off
Remote Station Unit is
remotely taking control of the
Local Computer Unit.
In this mode, there are two
statuses as follows:
1. If the 3 LEDs (Num, Caps
and Scroll Lock) on the
keyboard are flashing, the Local
Computer Unit is now taking
control of the system.
2. If the 3 LEDs (Num, Caps
and Scroll Lock) on the
keyboard are not flashing, the
system is waiting for Remote
Station Unit or Local
Computer Unit to take control
Table 3.1: LED - Control indication for Remote Station Unit
Power Up LED Status
LED Indicators
Local: On
Table 3.2: The Initial status and indication is displayed
when
ServerLink Extend Cat5 KVM
Extender is powered up