ServerLink Extend Cat5 Installation Instructions Manual - page 15
13
--------------
Remote Station Unit
Hotkeys Control
Table 5: Hotkey control for Remote Station Unit
Beeps corresponding to video compensation
Ctrl + Ctrl + E + F11
Beep sounds
UTP Cable Length
1 beep
0
〜100 feet (0〜30 meters)
2 beeps
100
〜200 feet (30〜60 meters)
3 beeps
200
〜300 feet (60〜90 meters)
4 beeps
300
〜400 feet (90〜120 meters)
5 beeps
400
〜500 feet (120〜150 meters)
Hotkey Commands
Function Description
*Ctrl + Ctrl + T
i
Toggles console control between Local
Computer and Remote Computer
Ctrl + Ctrl + Esc
Escape from hotkey mode
*Ctrl + Ctrl + 1
i
Switches control to local computer
*Ctrl + Ctrl + 2
i
Switches control to remote computer(input
allowed only if the Local Computer Unit is in
Remote or Auto mode)
*Ctrl + Ctrl + F2
Toggles console control between Local
Computer and Remote Computer
Ctrl + Ctrl + F4
(Keyboard speed selection)
Adjusts the typematic rates of keyboard, the
ServerLink Extend Cat5 KVM Extender generates 1
to 4 beeps corresponding to 6, 12, 20, and 30
characters/sec respectively.
Ctrl + Ctrl + F11
(Video Compensation
Adjustment)
Adjusts the video compensation, the ServerLink
Extend Cat5 KVM Extender generates 1 to 5 beeps
corresponding to the cable lengths of 0~30, 30~60,
60~90, 90~120 & 120~150 meters, respectively.
Ctrl + Ctrl + F12
Mouse resynchronized
(for PS/2 only)