ServerLink Extend Cat5 Installation Instructions Manual - page 3
1
------------------------
Introduction
The ServerLink Extend Cat5 KVM Extender consists
of a Local
Computer Unit and a Remote Station Unit that can be used to
locate a keyboard/monitor/mouse set up to 150 meters away from a
computer or KVM switch using an inexpensive Category 5 UTP
(unshielded twisted pair) cable. It provides an ideal and convenient
way to remotely access the computer which is located in a secure,
clean or dirty, harsh environment.
The
ServerLink Extend Cat5 KVM Extender is designed to enable
one computer to be controlled by one or two users. It also allows for a
console to control two computers locally and remotely. It is an ideal
solution for factory or construction areas where you want to secure
your computers and valuable data or manage them either in remote
or both in remote and local sites.
No software or dip switches are required, just plug and play. With one
push button, two LED indicators and simple hotkey commands, you
can manage this device easily.
Figure 1: Connection of 1-to-3 cable
Connection to
ServerLink Extend
Connection to
Monitor/Keyboard/Mouse