- DL manuals
- Smarthome
- Recording Equipment
- 4071
- User Manual
Smarthome 4071 User Manual
Summary of 4071
Page 1
Controlinc maxi ™ ™ tabletop controller for models: #4071 controlinc maxi tabletop controller.
Page 2
Controlinc maxi user’s guide table of contents about controlinc ................................................................................................................................ 3 key controlinc features.....................................................................................
Page 3
Controlinc ™ maxi ™ user’s guide about controlinc congratulations on purchasing the controlinc ™ maxi tabletop controller. Controlinc allows you to control both your legacy x10 products and all scene compatible smarthome design products. Bright/dim buttons on/off buttons preset dim button unit code ...
Page 4
Controlinc ™ maxi ™ user’s guide key controlinc features • setup is easy – controlinc installs in minutes • simple guest-friendly soft-touch on/off buttons • easily access all 256 plc addresses • transmits preset dim commands • programming buttons for smarthome scene compatible products • flexible –...
Page 5
Controlinc ™ maxi ™ user’s guide how to install controlinc maxi controlinc installation tips caution read and understand these instructions before installing, and retain them for future reference. Controlinc is intended for installation in accordance with the national electric code and local regulat...
Page 6
Controlinc ™ maxi ™ user’s guide basic operation sending plc commands when the cover is opened, buttons are provided for easy access to all 256 combinations of plc house and unit codes. To control a receiver, follow these steps: 1. Press the house code letter (buttons a through p). 2. Press the unit...
Page 7
Controlinc ™ maxi ™ user’s guide using pre programmed buttons the controlinc maxi includes four pre-programmed buttons that enable easy programming of scene- enabled smarthome products. These buttons will send the unique “m-n-o-p” codes (i.E. “clear sequence”) necessary to setup scenes. For more inf...
Page 8
Controlinc ™ maxi ™ user’s guide using the pre programmed buttons to setup scenes fade rates: to modify fade rates for devices in a scene, follow these steps: 1. Open the cover. 2. Press the add to scene button – this will send out the “clear sequence” (o16, n16, m16, p16, m16). 3. Adjust the dimmer...
Page 9
Controlinc ™ maxi ™ user’s guide advanced controlinc maxi features overview of user defined buttons the controlinc maxi has two distinct modes of operation; cover closed and cover open. When the cover is closed, the unit has five user defined on/off button pairs that allow the user to easily turn on...
Page 10
Controlinc ™ maxi ™ user’s guide programming addresses into a button pairs when the cover is closed, the five on/off button pairs can be programmed to control any of the 256 different x10/plc addresses. The default addresses are house code a and unit codes 1 through 5. When using the button pairs to...
Page 11
Controlinc ™ maxi ™ user’s guide programming individual buttons the 5 user defined on/off button pairs can be split and individually programmed to allow each of the 10 buttons to be programmed independently (not as pairs). This allows for easy control of up to 10 different addresses. The individual ...
Page 12
Controlinc ™ maxi ™ user’s guide controlinc maxi features turning the audible sounder on and off the controlinc maxi offers the ability to enable or disable the audible sounder. The default setting for the sounder is enabled. The controlinc maxi will emit a short beep whenever a button is pressed. I...
Page 13
Controlinc ™ maxi ™ user’s guide turning polite mode on and off the controlinc maxi offers the ability to enable or disable polite mode. The default setting for the status led is enabled. Polite mode is an intelligent feature which, when enabled, will allow the controlinc maxi to wait until the line...
Page 14
Controlinc ™ maxi ™ user’s guide how to use controlinc maxi using controlinc maxi’s buttons the following table gives an overview, and the sections thereafter give the details, on how to use controlinc maxi’s buttons. Button applies to cover tap press and hold on programmed as button pairs closed ra...
Page 15
Controlinc ™ maxi ™ user’s guide using the on and off button pairs the on and off buttons have a dual purpose. If you tap them briefly, they turn x10 devices linked to the address they control on or off. If you hold them down, the on button will brighten and the off button will dim any dimming modul...
Page 16
Controlinc ™ maxi ™ user’s guide will begin to dim, unless they are already fully off. Switchable modules will not be affected. When you let up, dimmable modules will stop going dimmer and controlinc maxi’s status led will blink off again. • to brighten by one step only those x10 devices controlled ...
Page 17
Controlinc ™ maxi ™ user’s guide mounting options for controlinc maxi tabletop mounting you can use controlinc maxi in a horizontal or a vertical position on the tabletop. To use in a vertical position, pull out the hinged stand on the bottom of the unit. Changing the button labels the smoked plasti...
Page 18
Controlinc ™ maxi ™ user’s guide troubleshooting problem possible cause solution the status led on my controlinc maxi is not turning on at all. Controlinc maxi is not getting power. Make sure controlinc maxi is not plugged into a switched outlet that is turned off. Controlinc maxi and your device(s)...
Page 19
Controlinc ™ maxi ™ user’s guide specifications controlinc maxi’s specifications general smarthome product number 4071, controlinc maxi tabletop controller warranty 2 years operation on/off button pairs 5 channels or 10 buttons all on/all off buttons control all x10 devices linked to channels 1-5 (o...
Page 20
Controlinc ™ maxi ™ user’s guide certification controlinc maxi has been thoroughly tested by its etl semko, a nationally recognized independent third-party testing laboratory. The north american etl listed mark signifies that the product has been tested to and has met the requirements of a widely re...