Smartload DEGX1 User Manual - Fault Code 28
15
Fault Code 28
Data Retrieval Error Following Loss of Power
Remedy:
(1) Switch off the mains power supply to the dryer for at least 10
seconds and confirm error.
(2) Replace the motor control module.
Fault Code 29
Brown-Out Data Retrieval Error.
Remedy:
(1) If the fault occurs every time the dryer is turned on, replace
the sensor module.
(2) Replace the motor control module.
Fault Code 30
Lid Lock unable to Lock - User Warning.
The lid lock failed to lock. (Not user displayed.)
Remedy:
(1) Ensure the lid is closed and the tongue engaged.
(2) Replace the lid lock harness.
(3) Replace the lid lock.
(4) Replace the sensor module.
Note: The blue Cool Down LED illuminated without the fault “beeps”
indicates the dryer is in a low mains voltage (brown out) state, and is
momentarily displayed whenever the supply power is turned off.