Smartwatch Eco Installation & Operation Manual - page 14
14
6. When prompted to do so, either enter your iTunes account
details or create a new account if you don’t already have one.
7. When installation is complete, the ScDvr icon will appear on your home screen.
5.3. Software operation
Run the ScDvr program from the home screen.
5.3.1. Add new DVR login details
Select ‘Add’ on the top of the screen to enter details about the
DVR you wish to log into. You will need to enter the following
information:
•
DVR name
•
Address (IP address)
•
Port number
•
User ID
•
Password
Select ‘Go’ to save these details and connect to the DVR.
5.3.2. Log into a DVR
ScDvr can store the information of more than one DVR. Select the
required DVR and then select ‘Go’ to log into the DVR.
Connecting to the network may take some time depending on
network coverage etc.
Once connected, live images from the DVR will be displayed.
N.B. Live images cannot be displayed through your mobile
device unless Recording is switched on at the DVR locally.