Summary of 3641
Page 1
Model 3641 battery charger and analyzer user guide.
Page 2: Important Notice
[engn001 inside front cover] important notice safety all danger, warning and important notes must be followed for your safety. These safety messages will be in the following formats: danger: you may risk possible loss of life warning: you may risk bodily harm important: you risk damage to the vehicl...
Page 3: Contents
I contents contents important safety instructions ..................................................... Ii specifications ...............................................................................................................Iv getting started ...................................................
Page 4
Ii battery charger and analyzer user guide important safety instructions warning: 1. Save these instructions – this manual contains important safety and operating instructions for the battery charger and analyzer. 2. Do not expose the battery charger and analyzer to rain or snow. 3. Use of an attach...
Page 5
Iii contents make sure all accessories in the vehicle are off, so as not to cause an arc. B) be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by using a piece of cardboard or other nonmetallic material as a fan. C) clean battery terminal...
Page 6
Iv battery charger and analyzer user guide warning: • the battery charger and analyzer is intended only to test and charge 12v gel-cell, absorbed glass mat (agm), and wet cell, lead-acid automotive rechargeable batteries. Other types of batteries may burst and cause per- sonal injury. • do not opera...
Page 7: Getting Started
1 1 2 3 5 6 7 8 9 4 getting started battery charger and analyzer the battery charger and analyzer is a non-portable test- bench that incorporates the following battery test and charge functions into a single bench-top unit: • test and determine if a 12 volt gel-cell, absorbed glass mat (agm), or wet...
Page 8: Quick Tour
2 battery charger and analyzer user guide quick tour figure: battery charger and analyzer take a moment to quickly tour the battery charger and analyzer . 1. Compact flash card port (see item 6 in figure: battery charger and analyzer ports): program updates for the battery charger and analyzer opera...
Page 9: Set Ethernet
3 set ethernet to set up the ethernet communication, follow these steps: 1. Press the menu button. Press button 2> setup> button 3 to select ethernet setup. 2. To view the net setup, press button 1 - display net setup. To change the net setup, press button 2 - edit net setup. 3. To edit the net setu...
Page 10: Test Report
4 battery charger and analyzer user guide 7. Press a number key to select one of the following methods of battery identification: • cca or mca: 1. Enter the cca or mca number with the number keys, press go. 2. Select yes/no if gel cell/agm battery, testing will begin immediately. • amp hours: 1. Ent...
Page 11: Software Update
5 software update the battery charger and analyzer operating software is easily updated with upgraded programs supplied on compact flash cards. To update battery charger and analyzer software with the compact flash card, follow these steps: 1. Turn off the battery charger and analyzer. Insert the up...
Page 12
6 battery charger and analyzer user guide spx corporation limited warranty this warranty is expressly limited to original retail buyers of spx electronic diagnostic tools (“units”). Spx units are warranted against defects in materials and workmanship for three years (36 months) from date of delivery...
Page 14
655 eisenhower drive, owatonna, mn 55060-0095 phone: 507-455-7000, international sales: 507-455-7223 service solutions, a unit of spx corporation 1-800-533-6127 www.Otctools.Com © 2002 spx corporation. All rights reserved 03/21/03 part no. 516373.