Spypoint SMART-PRO User Manual - page 12
12
Custom Settings
PRO SETTINGS
The Pro settings allows to personalize the configuration. Choose
the mode (PHOTO, TIME LAPSE, or VIDEO) and set their respective options.
When the PHOTO or VIDEO mode is selected, the test light in front of the
camera will flash for 60 seconds to allow the user to leave the area without
being photographed.
PHOTO SETTINGS
Sets the options of the PHOTO mode.
Delay:
(Instant*/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next photo. A longer delay minimizes the number
of photos taken and maximizes the battery life. A shorter delay maxi-
mizes the number of photos taken but requires more battery power. The
shorter times interval are recommended when the camera is used for
security purposes.
Multi-shot:
(1/2/3/4/5/6/7/8/9/10 consecutive shots)
Takes up to 10 consecutive shots at each detection, with a 10-second
delay between each photo. This option allows the user to get up to 6
photos from different angles when the camera is in PHOTO mode.
TIME LAPSE SETTINGS
Sets the options of the TIME LAPSE mode.
Interval:
(30s/1m/3m/5m/15m/30m/1h)
Allows the camera to take photos at regular preset intervals. For example,
if the option "5m" is selected in the TIME LAPSE mode, the camera takes
a photo every 5 minutes even if there is no detection. This option allows
the user to obtain photos of game outside the detection range of the
camera.
Note: The TIME LAPSE mode only applies for photos, not videos.
When
the TIME LAPSE mode is selected, the DELAY option and the MULTI-SHOT
mode are disabled.
VIDEO SETTINGS
Sets the options of the VIDEO mode.
Delay:
(10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next video. A longer delay minimizes the number
of videos taken and maximizes the battery life. A shorter delay maximizes
the number of videos taken but requires more battery power. The shorter
times interval are recommended when the camera is used for security
purposes.
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
Photo first
When this option is enabled, a photo is taken immediately before each
video.
Note: The file name of the photo corresponds to the digit before the
video file name. For example, if the name of the photo is PICT001, the
name of the video will be PICT002.