Square Scrub Doodle Scrub EBG-9 Owner's Manual - page 11
page 10
Blue Driver Pad * SS P0511BLU * 5.25x10.5
This medium to heavy duty Blue pad can be used for heavier cleaning and buffing situations
but primarily used as a spacer pad. Always check spacer and driver pads frequently for wear
and replace as needed! Use wet or dry on VCT and tile. Can be used for heavier cleaning and
buffing situations.
18/cs
White Driver Pad * SS P0511DRIVER * 5.25x10.5
The Driver pad is designed to provide a spacer between your sandpaper and the machine. Just
1/4” thick, Use this pad with Sandpaper and Resin diamonds. Always check spacer and driver
pads frequently for wear and replace as needed! Change pad often to protect floor.
48/cs
SHO Pad * SS P0511SHO * 5.25x10.5
The SHO pad should be used only for the heaviest of chemical stripping jobs. Extremely
abrasive and heavy, dense fibers. Best when dirt and buildup are severe. Use wet
on VCT and
tile. 20/cs
SQP Pad * SS P0511SQP * 5.25x10.5
SQP is a thin pad designed to remove floor finish without chemicals. Remove several layers of
acrylic finish to prep for recoating. Use dry or wet
on VCT and tile.
60/cs
White Pad * SS P0511WHT * 5.25x10.5
The White pad is used as a light duty polish pad. The 1” thick pad is used without a driver pad
and is great for spreading chemcials while buffing.
16/cs
Xtreme Sponge * SS P0511XTR * 5.25x10.5
Use the Xtreme Sponge to remove scuff marks on VCT or bathroom tile. A little water and this
melamine pad deep cleans and restores shine between refinishing jobs. Use wet
on VCT and
bathroom tile.
5/cs
Blue Tile and Grout Pad * SS P0511TGB * 4.75x10
Our Tile and Grout pad is best on grouted tile floors, but can be used very effectively on
terrazzo, poured non-slip, concrete and other uneven floors. Use wet
on several surfaces.
Sold Individually
***Specifications and information contained in this manual are subject to change without notice
Doodle Scrub Pad Ordering
Information