Square Scrub Doodle Scrub EBG-9 Owner's Manual - Sound Power Level:
page 5
Transport of Machine
To transport this machine, the following procedure is advised:
• Unplug machine from power source.
• Always leave a pad on the machine to protect the grip face from damage in transport and
storage.
• Secure machine when transporting in a vehicle to prevent movement.
• NEVER PICK THE DOODLE SCRUB UP BY THE HANDLE ALONE!
Always pick the Doodle
Scrub EBG-9 up with one hand on the handle and the other hand picking up the base. Failure to
do so could possibly damage or ruin your machine.
Operating Instructions
1. Move machine to work location. Never operate, transport, or store the machine without
a pad to protect the grip face.
2. Affix the handle clip onto either of the two provided base clips.
3. Plug machine into grounded power outlet.
4. Hold the machine’s handle with one hand while gently pressing the switch on the top of
the handle with the other hand.
5. Begin moving the machine over the floor in either a mop-like motion or along edges.
6. Continue moving the machine over the selected surface, checking your pad every 15 to 30
minutes (depending on pad in use) to maintain optimum performance.
Airborne Noise and Vibration Emissions
Sound Power Level:
120V:
Under 57 dBA
240V:
Under 57 dBA
Vibration Total at Base:
120V:
Avg. 6.5 mm/s
2
, max at 6.9 mm/s
2
240V:
Avg. 5.8 mm/s
2
, max at 6.0 mm/s
2