Square Scrub Doodle Scrub EBG-9 Owner's Manual - Prior to Using (Daily)
page 2
***figure 1
Maintenance Schedule
Prior to using (daily)
• Check AC power cord. Do NOT operate equipment if AC power cord is cut, frayed or if
ground is missing.
• Check grip face and driver pad : inspect for wear/debris. Replace as needed.
After use (daily)
•
Clean pad and base plate assembly : remove/replace pad as needed.
•
Inspect grip face for wear. Remove debris between grip face and base
plate.
•
Wipe entire unit with damp microfiber cloth.
•
Make certain a pad is placed on grip face.
Weekly Preventive Maintenance
•
Check grip face for wear.
•
Use vacuum to clean away debris build-up around base plate.
Annually
•
Replace
ALL isolators.
•
Bearing Assembly Replacement*
*The Bearing assembly is considered to be a wear item. We recommend that the bearing
assembly be replaced as needed. Unit will become noisy when bearing needs to be
replaced.
***NOTE:
Be sure to replace isolators when you replace the bearing.