Sussman ES Installation, Operation And Maintenance Manual - page 12
12
Installation, Operation & Maintenance Manual
Digital Timer - Operation Instructions
TO SET TIME & DAY OF
CLOCK
1. Press Menu
2. 24h AM or PM blinking, press
+ or – to select, press OK
3. Hour (12:00) blinking, press +
or – to select, press OK
4. Minute (12:00) blinking, press
+ or – to select, press OK
5. Arrows for days
blinking,
press + or – to select, press OK
6. Go to step 8 to continue with programming or press
Menu to end.
TO SET TIMER ON/OFF TIMES
7. Press Menu and press OK four times to go
current time/day setting above
8. prog 01 blinking and ON symbol
displayed, press +
or – to select, press OK
9. Hour (12:00) blinking, press + or – to select, press OK
10. Minute (12:00) blinking, press + or – to select, press
OK
11. Arrows for days
blinking, press + or – to select,
press OK
12. prog 02 blinking and OFF symbol
displayed,
press + or – to select, press OK
13. Hour (12:00) blinking, press + or – to select,
press OK
14. Minute (12:00) blinking, press + or – to select, press
OK
15. Arrows for days
blinking, press + or – to select. See
possible combinations below.
16. Press Menu to end or press OK and repeat steps 8 to
15 to set more ON/OFF times.
PROGRAMMED DAY COMBINATIONS:
Every day (arrows
on all days)
Monday to Saturday
Monday to Friday
Saturday and Sunday
Any individual day
RUN MODE
On Run mode, display will show current time/ date, on/off
status, override/automatic status, hourly on/off setting for
the day and Daylight Saving Time.
ON/OFF STATUS
ON symbol
displayed when timer is on and OFF
symbol
displayed when timer is off.
OVERRIDE/AUTOMATIC
When the timer is On
, press + to manually turn
the timer Off
and display arrow will point to
OVR. Press + again to go back to On
and display
arrow
will point to AUTO.
When the timer is Off
, press +to manually turn
the timer On
and display arrow will point to
OVR.
Press + again to go back to Off
and display arrow
will point to AUTO.
When the timer is in the override mode (
on OVR),
timer will stay in that position until the next pro-
grammed time, at which time the arrow_will point
to AUTO and continue in the automatic mode.
HOURLY ON/OFF SETTING FOR THE DAY
Hash marks on the upper and right edges of the dis-
play show the hourly On times for the day. Absence
of hash mark on a specific hour indicates that the
timer is Off on that hour.
DAYLIGHT SAVING TIME.
In the Run mode, use a pencil point and press + hr
for Daylight Saving Time and current time advances
one hour and + hr displayed. To revert back to
Standard Time, press + hr and current time falls back
one hour and + hr display disappears.
PROGRAMMING CONFLICTS.
Switch Off commands have priority over switch On
commands.
NOTES:
1. The timer is set according to the boiler operation.
When the timer is ON the boiler is ON and the
blowdown is OFF.
2. Timer must be powered up during programming
to display On/Off status.
3. During programming, if no button is pressed after
1 minute, the timer will revert back to Run mode.
Mo
Tu
We
Th
Fr
Sa
Su
14
16
18
20
22
24
+
-
Menu OK
Res.
+1h