SWAGTRON SWAGDRONE 210-UP Quick Start Manual - page 16
SWAGTRON
®
SWAGdRONe
TM
210-UP Racing Quadcopter Quick Start Guide
16
10.5 Power Board Overview
10.6 OSD Information
Upgrade
For upgrades, please go to swagtron.com for details. Use the UP02 cable and connector to
connect.
1. 5V power output
2. Brushless ECS connectiont position(CCW)
3. Brushless ECS connectiont position(CW)
4. Lighting Lamp Connection port
5. Camera Connection Port: (3 pins/11.1V)
6. Main controller Flexible flat cable Connection port
7. Buzzer:
(An alarm which sounds automatically when the signal
between the drone and remote controllers are suddenly
lost or the battery voltage dips below 14.0V)
8. Rear LED light connection port
9. Connection port for receiver or
external receiver converter
10. OSD connection port
11. Transmitter connection port
12. Video switch:
Without OSD, Please turn the switch from
“1” to "ON" position to start the video.
With OSD, Please turn the switch to "1"
position to shut off the video.
Front
Back
Head
Head
O N
2
1
O N
2
1
1. 5V power output
2. Brushless ECS connectiont position(CCW)
3. Brushless ECS connectiont position(CW)
4. Lighting Lamp Connection port
5. Camera Connection Port: (3 pins/11.1V)
6. Main controller Flexible flat cable Connection port
7. Buzzer:
(An alarm which sounds automatically when the signal
between the drone and remote controllers are suddenly
lost or the battery voltage dips below 14.0V)
8. Rear LED light connection port
9. Connection port for receiver or
external receiver converter
10. OSD connection port
11. Transmitter connection port
12. Video switch:
Without OSD, Please turn the switch from
“1” to "ON" position to start the video.
With OSD, Please turn the switch to "1"
position to shut off the video.
Front
Back
Head
Head
O N
2
1
O N
2
1