SWAGTRON SWAGDRONE 210-UP Quick Start Manual - page 17
SWAGTRON
®
SWAGdRONe
TM
210-UP Racing Quadcopter Quick Start Guide
17
10.7 Receiver Introduction
Fixed ID Code Removal
In the event that you want to clear the fixed ID from
the remote controller, follow these steps.
STEP1. Press the Clearing Key button, and power
on the 210-UP.
STEP2. The Receiver's RED LED will slowly blink to
indicate that the fixed ID has been cleaned.
STEP3. Set the Remote Control's Fixed ID setting to
OFF.
10.8 Introduction for Main Flight Controller
Port Introduction
1. Upgrade port: used for program upgrading
2. Code switch: slide the code switch from“1” to "ON" to start the OSD
Please use UP02 and the UP02 adapter to upgrade.
O N
2
1
UP02 Adapter
UP02
Port Introduction
Data port
3. USB Port (Used for upgrading)
4. Connection Port
(Used for connection to the flexible flat cable)
Flexible Flat Cable Connection
USB Cable
The metal surface of the flat
flexible cable plug should be
inserted downward to power
the board port properly.
The metal surface of a flexible
flat cable should be inserted
upward to the main controller
port properly.
1. 4-Pin Port (Not used)
2. 6-Pin Port (Not used)
Upgrading
Please upgrade online via the SWAGTRON official site.
UP02 components not included.
Clearing Key