T+A CM Active Mini User Manual - page 12
12
These
-loudspeakers are high-quality two-way monitor
speakers with very neutral, audiophile sound characteristics. They are fitted with
zero-loss active cross-overs and separate output stages for each drive unit (fully
active loudspeakers).
The
feature an automatic power-on circuit which switches the
loudspeakers on when a music signal is present, and switches them off again
when playback ceases. They can be operated in conjunction with any pre-
amplifier outputs.
loudspeakers are supplied with a front cover. This is designed to
protect the drive units.
The grilles cannot and must not be removed, as they are an integral part of the
loudspeakers’ acoustic system. Any attempt at removal will damage the grilles and
have an adverse effect on the sound image.
Front
Back panel
LED indicator
(front panel)
The LEDs behind the front grilles indicate the power status of the
-loudspeakers.
LED off
The speaker is in stand-by mode, and will switch itself on automatically when
a music signal is present.
LED green
The green LED indicates normal operational mode: the speaker is switched
on and ready for use.
Connections
(back panel)
DC input socket
18V, 3,3A
Socket for connecting the power supply (external mains PSU)
The
loudspeakers must always be used with the external
mains PSU supplied in the set.
Audio input
RCA (Cinch) socket for connection to pre-amplifiers with an output level of at
least 1 V
eff.